About The Reader; The Bc40Xx™ Radio Base; Base Leds - Datalogic Gryphon I GD4100 Product Reference Manual

About the Reader

Typically, units are factory-programmed for the most common terminal and communications
settings. If you need to modify any programmable settings, custom configuration can be
accomplished by scanning the programming barcodes within this guide.
Several models of the Gryphon are available, and are covered in this manual:
•
•
•
•
Programming can alternatively be performed using the Datalogic Aladdin™ Configuration
application which is downloadable from the Datalogic website listed on the back cover of this
manual. This multi-platform utility program allows device configuration using a PC. It
communicates to the device using a serial or USB cable and can also create configuration
barcodes to print.
Advancements in the LED technology used in the imager-based readers significantly improve
the illumination of the target field of view, resulting in higher scan efficiency. Whether used in
Single Trigger or Continuous Mode, the ergonomic design of the reader will help to promote
comfortable handling during extended periods of use.
See "Interface Selection"on page 29
model type.
The BC40xx™ Radio Base

Base LEDs

LEDs on the Gryphon I Base provide information about the Base's status, as shown in
Figure 1
Product Reference Guide
Gryphon I GD4100 - Corded linear imager barcode reader
Gryphon I GM4100 - Cordless linear imager barcode reader with Datalogic STAR™.
Gryphon L GD4300 - Model with Laser scan engine.
Gryphon I BT 4100 - Model with Bluetooth options.
. Gryphon I Base LEDs
YELLOW LED
RED LED /
GREEN LED
for a listing and descriptions of available interface sets by
BUTTON
About the Reader
Figure 1.
11