Configuration Using Barcodes; Configuration Parameters - Datalogic Gryphon I GD4100 Product Reference Manual

This and following sections provide programming barcodes to configure your reader by
changing the default settings. For details about additional methods of programming, see
Configuration Methods on page

Configuration Parameters

Once the reader is set up, you can change the default parameters to meet your application needs.
Refer to
default values and select the interface for your application.
The following configuration parameters are applicable to all Gryphon models covered in this
manual, unless otherwise indicated. The items are divided into logical groups, making it easy to
find the desired function based on its reference group.
Interface Configuration:
• "RS-232 ONLY Interface" on page 41
• "RS-232/USB-Com Interfaces" on page 46
• "Keyboard Interface" on page 55
• "USB-OEM Interface" on page 67
• "IBM 46XX Interface" on page 69
• "Wand Emulation Interface" on page 73
Parameters common to all interface applications:
"Data Format" on page 77
•
"Reading Parameters" on page 91
•
functioning.
Symbology-specific parameters:
"Code Selection" on page 107
•
families and their options.
Model-specific parameters:
"Wireless Features" on page 257
•
Bluetooth models.
• "Laser Features" on page 287
Product Reference Guide

Configuration Using Barcodes

16.
You must first enable your reader to read barcodes in order to use this
section. If you have not done this, go to
complete the appropriate procedure.
"Standard Defaults" starting on page 335
gives options to control the messages sent to the Host system.
Setup, starting on page 17
for initial configuration in order to set the
control various operating modes and indicators status
provides configuration of a personalized mix of codes, code
offers configuration of radio control parameters for RF and
provides options specific to laser models.
Chapter 3
and
37