Display Settings; Display Mode; Rf Features; Configuration Update - Datalogic Gryphon I GD4100 Product Reference Manual

References

Display Settings

Display Mode

The user can control the reader display behavior according to the following selections:
Local Echo mode: When a barcode is read with the reader:
•
•
•
•
Normal mode: When a barcode is read with the reader:
•
•
•
Clear Display After Decode mode: When a barcode is read with the reader:
•
•
•
Host messages sent to the reader are always written to the reader display.

RF Features

Configuration Update

Automatic Configuration Update
When this feature is enabled, the base station and reader will keep their configurations
synchronized. If a reader's configuration is altered by reading programming labels, this change is
automatically transferred and updated in a linked base station. Likewise, if the base station's
configuration is changed using Aladdin or by host commands, then the reader's configuration
will automatically be updated if this feature is enabled.

RF Address Stamping

Source Radio Address Delimiter Character
This option specifies the delimiter character to be placed between the label data and radio
address when address stamping is enabled.
318
The code is sent to the Host.
The reader display is cleared.
The code is also sent to the reader display (Local Echo).
The cursor is positioned after the last printed character on the reader display.
The code is sent to the Host.
The reader display is not cleared. Therefore if any previous data was displayed on the
reader screen it remains.
There is no Local Echo to the reader display.
The code is sent to the Host.
The reader display is cleared. Therefore if any previous data was displayed on the reader
screen it is cancelled and the screen remains blank.
There is no Local Echo of the code to the reader display.
This feature only applies if
page 270
is enabled.
"Source Radio Address Transmission"on
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300