Code 128 Set Length 1 - Datalogic Gryphon I GD4100 Product Reference Manual

Code 128

Code 128 Set Length 1

Specifies one of the barcode lengths for
length if in
includes the barcode's data characters only. The length can be set from 1 to 80 characters.
Table
setting this feature.
Table 4. Code 128 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Code 128 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
158
Variable Length Mode, or the first fixed length if in
4
provides some examples for setting Length 1. See
01 Character
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 128 LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Code 128 Length Control. Length 1 is the minimum label
page 302
EXAMPLES
07 Characters 15 Characters
'0' and '7'
01 = Length 1 is 1 Character
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Fixed Length Mode. Length
for detailed instructions on
80 Characters
'1' and '5' '8' AND '0'
CANCEL