ACK Character
This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII
characters or any hex value from 0 to 0xFF can be selected. See
Select ACK Character Setting
NAK Character
This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII
characters or any hex value from 0 to 0xFF can be selected.
Select NAK Character Setting
50
Setting to previously defined characters such as XON, XOFF, or host com-
mands conflicts with normal operation of these characters. 8-bit data is not
recognized when the option
DEFAULT
Setting to previously defined characters such as XON, XOFF, or host com-
mands conflicts with normal operation of these characters. 8-bit data is not
recognized when the option
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Data Bits
has been set as 7 Data Bits.
0x06 'ACK' Character
See
Data Bits
has been set as 7 Data Bits.
0x15 'NAK' Character
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
page 293
for more information.
page 294
for more information.