Datalogic Gryphon I GD4100 Product Reference Manual page 312

References
Table 39
STEP ACTION
1. Scan the ENTER/EXIT barcode
Determine placement of the
Label ID characters BEFORE or
AFTER with regard to scanned
2.
data using
Control, starting on page 82
Scan the barcode selecting the
symbology type you wish to
designate label ID characters
3.
for using Label ID Symbology
Selection, starting on page
Custom Label ID example
4.
(desired characters):
Find hex equivalents from the
ASCII Chart(inside back
cover), then scan in these
digits/characters using the
barcodes in the section:
Keypad, starting on page
5.
If you make a mistake before
the last character, scan the
CANCEL barcode to abort and
not save the entry string. You
can then start again at the
beginning.
6. Scan the ENTER/EXIT barcode
Scan the ENTER/EXIT barcode
7.
once again
Result:
310
. Label ID Examples
Enable as Prefix
Label ID
DataBar
Omnidirectional
83.
D B *
351.
44 42 2A
DB*[barcode
data]
EXAMPLES
(Scanner enters Programming Mode)
Enable as Suffix Enable as Prefix
Code 39 Interleaved 2 of 5
= C 3 +
3D 43 33 2B
(Scanner exits Label ID entry)
(Scanner exits Programming Mode)
[barcode
+[barcode data]
data]=C3
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Enable as Suffix
Code 32
P H
50 48
[barcode data]PH