Intercode Delay
Specifies the delay between labels transmitted to the host for this interface. The selectable range
for this feature is from 0 to 99 seconds.
page 301
See
Set Intercode Delay
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
64
in "References" for detailed information and examples for setting this feature.
DEFAULT
ENTER/EXIT PROGRAMMING MODE
00 = No Wedge Intercode Delay
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
CANCEL