Gs1 Databar™ Expanded Set Length 1 - Datalogic Gryphon I GD4100 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE
GS1 DataBar™ Expanded Set Length 1
This feature specifies one of the barcode lengths for
Length 1 is the minimum label length if in
Fixed Length
from 1 to 74 characters.
Table
setting this feature.
Table 20. GS1 DataBar™ Expanded Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select GS1 DataBar™ Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
Product Reference Guide
Mode. Length includes the barcode's data characters only. The length can be set
20
provides some examples for setting Length 1. See
01 Character
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 1SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
GS1 DataBar™ Expanded Set Length 1
GS1 DataBar™ Expanded Length
Variable Length Mode, or the first fixed length if in
page 302
EXAMPLES
07 Characters 52 Characters
'0' and '7' '5' and '2'
01 = Length 1 is 1 Character
Control.
for detailed instructions on
74 Characters
'7' AND '4'
CANCEL
225