Using The Bc40Xx™ Radio Base; Base Leds; Base Button - Datalogic Gryphon I GD4100 Reference Manual

Using the BC40xx™ Radio Base

Base LEDs

LEDs on the Gryphon I Base provide information about the Base's status, as shown in Figure
14.
Figure 14
The following table describes the significance of each LED:
See "Base Station Indications" on page 389

Base Button

The base contains a button, which is used primarily to perform a paging function. Pressing the
button causes a sound signal to be emitted by all scanners linked with this base, as long as the
scanner is awake (see
Mode Timeout" on page
The button can also be used to "force device connection" via the Datalogic Aladdin Software
tool (available for free download from the Datalogic website). See Aladdin for details.
Product Reference Guide
. Gryphon I Base LEDs
YELLOW LED
RED LED —
GREEN LED
LED
Power on / Data
Charging
Charge completed
Charging + Charge completed
"Powerdown Timeout" on page
37).
Using the BC40xx™ Radio Base
BUTTON
STATUS
Yellow On = Base is powered
Yellow Blinking = Base receives data and 
commands from the Host or the Reader.
Red On = the Battery is in progress.
Green On = the Battery is completely charged.
Red and Green Blinking together = the Reader is not
correctly placed onto the Base.
for more specific details on the LEDs.
164) and reception is enabled (see "Sleep
27