Specifying The Scan Size Of The Original - Oce cm4010 Facsimile Manual

SPECIFYING THE SCAN SIZE OF THE ORIGINAL

Specifying the size using paper sizes
Fax
Mode Switch
Exposure
Image
Settings
Standard
Resolution
Memory TX
1
Direct TX
Auto 8 x11
Original
Auto Reception
Fax Memory:100%
(1)
Fax
Scan Size
Original
Auto 8 x11
2-Sided
Booklet
2
2-Sided
Tablet
To specify the image orientation...
Touch the appropriate image orientation key so that it is highlighted.
Fax
Original
Auto 5 x8
Manual 5 x8 R 1 / 2
8 x11
Manual
3
• If you are sending a long original, touch the [Long Size] key.
The automatic document feeder must be used for a long original.
An original up to 800 mm long can be transmitted. The send size cannot be specified when sending a long original.
• To specify an AB size for the scan size, touch the [AB
scan size.
Fax
Scan Size
Original
5 x8 1 / 2
4
2-Sided
Booklet
2-Sided
Tablet
Auto
1 / 2
Special Modes
(2)
100% Send Size
1 / 2 Auto
Image Orientation
Inch
AB
1 / 2 1 / 2 8 x11R 1 / 2 11x17
1 / 2 8 x13(216x330) 1 / 2
8 x14 1 / 2 Long Size
1 / 2
Standard Size Size Input
(1)
Send Size
100%
1 / 2 Auto
Image Orientation
Display the original settings screen.
Address Book
(1) Touch the [Image Settings] key.
Sub Address
Special Modes
(2) Touch the [Original] key.
File
The current status appears at the top of the [Original] key
Quick File
Touch the [Scan Size] key.
OK
Specify the scan size.
OK
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
(2)
Inch] key to highlight the [AB] side and then specify the
Touch the [OK] key.
OK
31