Oce cm4010 Facsimile Manual page 83

• Programs are stored, edited, and deleted using "Address Control" in the System Settings for fax.
☞
Storing a Program
• The following settings can be stored in program.
Destinations: One-touch keys, group keys, search numbers
Original settings: Resolution and exposure settings
Special modes: Polling reception, Erase, Dual Page Scan, 2in1
F-code communication: A destination that includes an F-code can be stored to perform an F-code operation.
• The following settings cannot be stored in programs. These settings and functions can be selected before transmission.
Original settings: Send size setting
Special modes: Timer transmission, Card Shot, Job Build mode, Mixed Size Original, Slow Scan mode, Own Name
• Up to 48 programs can be stored and can be used repeatedly.
• Up to 500 destinations can be stored in each program.
Using a program to send a fax (Program)
1
Ready to send.
Scan
Fax
Mode Switch
8 x11 1 / 2
Image
2
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
Fax
Special Modes
Program
3
Timer
Program
program A
4
program C
program E
program G
(page 144)
Select, Polling Memory, Transaction Report, File, Quick File
Speaker
Send
Auto
Special Modes
Dual Page
Erase
Scan
Card Shot
2in1
(1)
program B
program D
program F
program H
Place the original.
Use the automatic document feeder or the document glass
depending on the functions stored in the program.
Touch the [Special Modes] key.
Resend
Address Book
Sub Address
File
Quick File
Touch the [Program] key.
OK
1/3
Select the program that you wish to use.
(2)
(1) Touch the desired program key.
OK
(2) Touch the [OK] key.
1/6
82