Polling Reception Using F-Codes - Oce cm4010 Facsimile Manual

POLLING RECEPTION USING F-CODES

This function enables your machine to call another machine and initiate reception of a fax stored in an F-code memory
box (polling memory) in the other machine. During the polling operation, your machine must correctly specify the F-code
(sub-address and passcode) configured in the other machine or polling reception will not take place.
• Verify the F-code (sub-address and passcode) of the memory box in the other machine before you perform F-code polling
reception.
• Do not place an original in the automatic document feeder or on the document glass when using this function.
• The receiving machine bears the phone charges of the transmission.
Ready to send.
Fax
Mode Switch
Image
1
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
Fax
Special Modes
Transaction
Report
2
Polling
(2)
Transmission request (polling) using an F-code
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
Your machine
Speaker Resend
Address Book
Sub Address
Special Modes
File
Quick File
Own Name
Select
Memory Box
(3) (1)
Transmission
Touch the [Special Modes] key.
Select polling.
OK
2/3
(1) Touch the
the screens.
(2) Touch the [Polling] key.
(3) Touch the [OK] key.
112
Other machine
Polling memory box
Box name: BBBB
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
keys to switch through