Oce cm4010 Facsimile Manual page 80

C 1
Special Modes
C 2
Card Shot
X
X
Y
Y
4
X
• The send size is automatically selected based on the original size you entered. The send size can also be changed
manually.
• To complete the setting and return to the screen of step 3, touch the [OK] key next to the [Cancel] key.
Fax
Auto
Mode Switch
Exposure
Image
Settings
Standard
Resolution
Memory TX
Direct TX
X 3 3 / 8
Original
Auto Reception
Fax Memory:100%
(1)
5
Fax
Scan Size
Original
X 3 3 / 8 Y 2
2-Sided
Booklet
2-Sided
Tablet
Cancel
Size Reset
(1 8 1/2)
3 / 8
3
inch
Fit to
(1 8 1/2)
2 1 / 8
inch
Send Size
(1) (A) (B)
Y
Address Book
Sub Address
Special Modes
Y 2 1 / 8
Special Modes
Quick File
(2)
100% Send Size
1 / 8 Auto 5 x8 1 / 2 1 / 2
Image Orientation
Enter the original size with the key.
OK
(1) Enter the original size.
OK
• With the [X] key highlighted, enter the X (horizontal)
length of the original with the
• Touch the [Y] key and enter the Y (vertical) length of the
original with the
(2)
(A) To return the original size to the default size, touch
the [Size Reset] key.
(B) To automatically enlarge or reduce the image size
to the send size, touch the [Fit to Send Size] key.
Do not touch this key if you wish to scan the original
at the original size that you entered.
(2) Touch the [OK] key.
Changing the original scan size and
send size.
If you do not need to change the scan size or send size, go to
step 6.
File
(1) Touch the [Image Settings] key and then
touch the [Original] key.
(2) Change the scan and send size.
(3)
• Touch the [Scan Size] key to return to step 4. Specify
the size.
OK
• Touch the [Send Size] key to display the send size
selection screen. Touch the desired send size key and
touch the [OK] key.
(3) Touch the [OK] key.
79
keys.
keys.