Oce cm4010 Facsimile Manual page 151

F-Code Memory Box / Polling Memory
No.001
Box Name
Sub Address
5
F-Code Memory Box / Polling Memory
No.001
Box Name
Polling Memory
6
Sub Address
F-Code Memory Box / Polling Memory
No.001
Sub Address / Passcode
Enter the sub address / passcode via the 10-key pad,then press [OK].
000000 / 111111
7
• " " and "#" cannot be used in a sub-address.
• When the [Passcode] key is touched, "/" appears.
If an incorrect entry is made...
Press the [CLEAR] key (
F-Code Memory Box / Polling Memory
No.001 Registration is completed.
Box Name
Polling Memory
Sub Address
000000/111111
8
To program another memory box...
Touch the [Next] key and repeat the procedure from step 5.
Next
Next
Next
Cancel
Passcode
(1) (2)
) and enter the correct digits.
Next
Enter a box name.
Exit
(1) Touch the [Box Name] key.
The box number (No.) that automatically appears is the
lowest number that has not yet been programmed.
(2) Enter a box name on the text entry screen
that will appear.
Enter up to 18 characters for the name.
For the procedure for entering text, see "6. ENTERING
TEXT" in the User's Guide.
Touch the [Sub Address] key.
Exit
Enter a sub-address and passcode.
Exit
(1) Enter a sub-address.
OK
Enter a sub-address with the numeric keys (maximum of
20 digits).
(2) Enter a passcode.
Touch the [Passcode] key and enter a passcode with the
(3)
numeric keys (maximum of 20 digits).
If you do not need to store a passcode, go to the next
step.
(3) Touch the [OK] key.
Touch the [Exit] key.
Exit
150