Relay Request Transmission Using; F-Codes - Oce cm4010 Facsimile Manual

Hide thumbs Also See for cm4010:
Table of Contents

Advertisement

RELAY REQUEST TRANSMISSION USING

F-CODES

This function is used to send a fax to an F-code memory box (relay broadcast) in another machine and have that
machine relay the fax to multiple end receiving machines.
When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end
receiving machines can help reduce phone charges. A relay request transmission can be used in combination with the
timer transmission function to further reduce phone costs.
Your machine
Transmission specifying an F-code
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
• Verify the F-code (sub-address and passcode) and end receiving machines programmed in the memory box (relay
broadcast) before you perform an F-code relay request transmission.
• Before this function can be used, the end receiving machines must be programmed in the F-code memory box (relay
broadcast) in the relay machine.
• The end receiving machines do not need to support F-code communication.
• This function can be used in combination with a broadcast transmission or timer transmission. An F-code relay request
transmission can also be stored in a program.
• Your machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to the
other machine (the relay machine). The other machine (the relay machine) bears the cost of sending the fax to each of the
end receiving machines.
System Settings for Fax: F-Code Memory Box
This is used to create memory boxes (relay broadcast) for F-code relay broadcast transmission.
A memory box name, sub-address, passcode, and end receiving machines are programmed in each box.
Programming an F-code Memory Box (Relay Broadcast)
The fax is transmitted to each of the
end receiving machines programmed
in the F-code relay broadcast memory
Relay machine
box.
F-code relay
broadcast memory
box
Box name: BBBB
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
End receiving machines are
programmed in this box.
(page 154)
119
Transmission

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cm2510

Table of Contents