Using The Automatic Document Feeder For Transmission - Oce cm4010 Facsimile Manual

USING THE AUTOMATIC DOCUMENT
FEEDER FOR TRANSMISSION
This section explains how to use the automatic document feeder to send a fax.
Indicator
line
1
When sending a multi-page fax, the automatic document feeder and the document glass cannot both be used to scan
the original pages.
Ready to send.
Scan
Fax
Mode Switch
8 x11 1 / 2
Image
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
2
To
Cc
AAA AAA
CCC CCC
EEE EEE
ABCD
Frequent Use
When scanning is completed, "Job stored." will be displayed together with a job control number. This number can be
3
used to locate the job in the Transaction Report or in the Image Sending Activity Report.
System Settings for Fax (Administrator):
The audible signal which indicates that scanning is completed (scan complete sound) can be selected.
To cancel scanning...
While "Scanning original." appears in the display, press the [STOP] key (
• If a fax is being received when the transmission operation is performed, the transmission will be reserved and transmitted
after fax reception is completed.
• If the memory becomes full while the originals are being scanned, a message will appear and scanning will stop. If Quick Online transmission
is taking place, the originals that were scanned will be transmitted. If Quick Online is not operating, the transmission will be canceled.
Speaker
Send
Address Book
Auto
Sub Address
Special Modes
Quick File
(1)
(2)
Condition
1/1
BBB BBB Address Review
DDD DDD
Sub Address
FFF FFF
OPQRST UVWXYZ
EFGHI JKLMN
Sort Address
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Place the originals face up. Insert the originals all the way into
the document feeder tray. The stack height must not be higher
than the indicator line.
Enter the destination fax number.
Resend
(1) Touch the [Address Book] key.
(2) Touch the one-touch key of the desired
destination.
☞
File
CALLING UP A FAX NUMBER FROM THE ADDRESS
BOOK
If the fax number of the transmitting machine is not stored in a
one-touch key in the Address Book, enter the fax number with
the numeric keys.
☞
Settings
ENTERING A FAX NUMBER WITH THE NUMERIC KEYS
(page 35)
Global
Press the [BLACK & WHITE START] key (
Scanning begins.
When scanning is completed, the machine sounds a beep.
Scan Complete Sound Setting
18
(page 36)
(page 176)
).
).