Transmission Using The Speaker - Oce cm4010 Facsimile Manual

TRANSMISSION USING THE SPEAKER

When the speaker is used to dial, the fax is sent after the number is dialed and the connection is made. If a person
answers, you will be able to hear his or her voice, but you will not be able to speak.
1
Ready to send.
Scan
Fax
Mode Switch
8 x11 1 / 2
Image
Settings
Memory TX
2
Direct TX
Auto Reception
Fax Memory:100%
After touching the [Speaker] key, you can touch the [Speaker Volume] key to adjust the volume of the speaker. The
speaker volume changes each time the [Speaker Volume] key is touched. Adjust the volume to the desired level.
Telephone mode.
Scan
Fax
Mode Switch
8 x11 1 / 2
Image
Settings
Fax Receive
Speaker Volume
Fax Memory:100%
3
To Cc
AAA AAA
CCC CCC
EEE EEE
ABCD
Frequent Use
4
To cancel transmission...
Touch the [Speaker] key before you press the [BLACK & WHITE START] key (
and transmission will stop.
Speaker
Send
Address Book
Auto
Sub Address
Special Modes
Quick File
Speaker
Send
Address Book
Auto
Special Modes
Quick File
(1)
(2)
Condition
1/1
Fax Receive
BBB BBB
DDD DDD
FFF FFF
EFGHI JKLMN OPQRST UVWXYZ
Sort Address
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
When the document glass is used, only one page can be
transmitted.
Touch the [Speaker] key.
Resend
You will hear the dial tone through the machine's speaker.
File
Enter the destination fax number.
Resend
(1) Touch the [Address Book] key.
(2) Touch the one-touch key of the desired
destination.
File
A group key cannot be used.
☞
CALLING UP A FAX NUMBER FROM THE ADDRESS
BOOK
If the fax number of the transmitting machine is not stored in the
Address Book, enter the fax number with the numeric keys.
☞
ENTERING A FAX NUMBER WITH THE NUMERIC KEYS
Settings
(page 35)
Wait until the connection is made and then
press the [BLACK & WHITE START] key (
Transmission begins.
26
(page 36)
). The line will be disconnected
).