Reading the copy counters in the key operator system
Access the key operator system (see page 14).
1
In the 'Basic' section, the current value of the copy, print and scan counters is
2
shown above the 'Print counters' (see figure 52)function.
[52] The copy and print volume displayed
When ready, exit the key operator system.
3
Reading the size of the copier memory
The standard size of the copier memory is 32 Mb, but can be extended up to
128 Mb (in increments of 16 Mb). To find out how much copier memory you
have on your Océ 31x5E, you must display the copier memory size.
Reading the memory size is only possible when the scan option is not
Note:
installed.
Displaying the size of the copier memory
Access the key operator system (see page 14).
1
In the 'Basic' section, the size of the copier memory is shown above the
2
'Memory' (see figure 53)function.
Configuration management
69