Confidential Communication Using; F-Codes - Oce cm4010 Facsimile Manual

CONFIDENTIAL COMMUNICATION USING

F-CODES

By sending a fax to an F-code memory box (confidential) in the receiving machine (your machine or the other machine),
the sender can direct the transmission specifically to the user of the box.
This is convenient for sending sensitive documents that you do not wish people other than the recipient to see, or when
the receiving machine is shared by multiple departments.
To print an F-code confidential fax, the print passcode must be entered.
Sender
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
The F-code (sub-address and passcode) of the memory box to be used should be verified by the sender and the recipient
before the fax is sent.
System Settings for Fax: F-code Memory Box
This is used to create memory boxes for F-code confidential communication (confidential).
A memory box name, sub-address, passcode, and print passcode are programmed in each box.
☞
Programming an F-code Memory Box (Confidential)
Transmission with an
F-code
Receiver
Reception in F-code Memory Box
Print passcode: Enter BBBB
The fax is printed.
(page 151)
108
Sub-address: AAAAAAAA
Passcode: XXXXXXXX