Oce cm4010 Facsimile Manual page 92

Ready to send.
Scan
Fax
Mode Switch
8 x11 1 / 2
Image
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
4
To Cc
AAA AAA
CCC CCC
EEE EEE
Frequent Use ABCD
You can touch the
after checking the settings, touch the [OK] key.
5
To cancel scanning...
Press the [STOP] key (
6
If no action is taken for one minute after the final original is scanned, scanning automatically ends and the
transmission is entered in the job queue.
Place next original.
Press [Start].
When finished, press [Read-End]
7
• If the memory becomes full during scanning, a message will appear and the transmission will be canceled.
• This function cannot be used in combination with the following functions:
Dual Page Scan, Card Shot
To cancel the job build function....
Touch the [Job Build] key in the screen of step 3 so that it is not highlighted.
Speaker
Send
Address Book
Auto
Sub Address
Special Modes
Quick File
(1)
(2)
Condition
1/1
Address Review
BBB BBB
DDD DDD
Sub Address
FFF FFF
OPQRST UVWXYZ
EFGHI JKLMN
Sort Address
key to display a list of the selected special mode settings. To return to the previous screen
).
(Pg.No.x)
Read-End
Enter the destination fax number.
Resend
(1) Touch the [Address Book] key.
(2) Touch the one-touch key of the desired
destination.
☞
File
CALLING UP A FAX NUMBER FROM THE ADDRESS
BOOK
If the fax number of the transmitting machine is not stored in the
Address Book, enter the fax number with the numeric keys.
☞
ENTERING A FAX NUMBER WITH THE NUMERIC KEYS
(page 35)
Settings
Global
Press the [BLACK & WHITE START] key
( ) to scan the first set.
Insert the next set of originals and press
the [BLACK & WHITE START] key (
Place the originals face up. Insert the originals all the way into
the document feeder tray. The stack must not be higher than
the indicator line. Repeat until all sets of originals have been
scanned.
Touch the [Read-End] key.
91
(page 36)
).