Before Starting The Work (230V Cenv) - Canon iR2030 Series Service Manual

Chapter 2

2.1.3 Before Starting the Work (230V CENV)

iR2025 / iR2030
1-1 Points to Make Before Installation
Be sure to go through the following before starting the work:
1) If you are installing the machine after moving it from a cold to warm location, be sure to leave the machine unpacked for at least 2 hours so that the machine is
fully used to the site temperature, thus avoiding image faults caused by condensation. (The term "condensation" refers to the formation of droplets of water on
the surface of a metal object brought in from a cold to warm place, i.e., as the result of the rapid cooling of the moisture (vapor) around the object.)
2) The machine weighs a maximum of about 50 kg. Be sure to work in a group of 2 persons when lifting it.
1-2 Checking the Contents
Check to be sure that none of the following contents is missing:
[1] Drum unit
[2] Power cable
[3] Ferrite core
Check the documentation and CD against the following table:
1-3 Names of Parts
[12]
[11]
[10]
[1] Copyboard cover*1
[2] Reader front cover
2-4
[1]
A3 A4 A4
A5 B5
B4
B5 LGL 11 17
LTR LTR STMT
8K 16K
[4]
---1
---1
---1
Operators manual: User's Guide
Operators manual: Network Quick Start Guide
Drum Unit Replacing Guide
Operators manual CD-ROM
Driver/Utility CD-ROM (UFR)
[1]
[9]
[8]
[2]
Set the size detector lever to the
Set the size detector lever to the
new paper size. new paper size.
Placer I'indicateur de format sur
Placer I'indicateur de format sur
le nouveau format. le nouveau format.
Bitte stellen Sie den Hebel zum
Bitte stellen Sie den Hebel zum
Erkennen des Papierformats auf
Erkennen des Papierformats auf
das neue Format ein.
das neue Format ein.
FU5-xxxx FU5-xxxx
[5]
F-2-5
[4] Cassette size label
[5] Caution sheet
[13]
[2]
[3]
[4]
[5]
[6]
[7]
[18]
F-2-6
[10] Left door
[11] Left cover (rear)
[3]
---2
---2
[14]
[15]
[16]
[17]
0017-7151