Canon iR2030 Series Service Manual page 79

2) Turn the developer pressure release lever [1] clockwise, and then open the
left door [2] until it stops.
The left door must be opened fully to prevent the drum from being damaged
while it is inserted into the drum unit.
[2]
3) Open the packaging bag of the new drum unit, take the new drum out of
it, and then remove packing tape.
The drum unit for Asia/Oceania is provided with pressure release hooks [1].
Remove them. Drum units for other regions are not provided with the
pressure release hooks.
[1]
4) Holding the protective cover [1] of the new drum unit, place the drum unit
against the iR body.
[1]
F-2-10
F-2-11
[1]
F-2-12
5) While holding the protective cover, insert the new drum unit [1] into the
iR body.
MEMO:
The protective cover will not be reused.
6) Turn the developer pressure release lever [1] counterclockwise, and then
close the left door [2].
[2]
[1]
7) Enter the date in the drum counter label [1].
8) Affix the drum counter label [1] on the drum unit.
Chapter 2
[1]
F-2-13
F-2-14
[1]
F-2-15
[1]
F-2-16
2-7