Chapter 7
6) Remove the multi-paper roller [1].
- Bearing [1], 1 pc.
[1]
When installing the multifeeder pickup roller, pay attention to the
orientation.
Left-side axis: [1] Long Right-side axis: Short [2]
[1]
7.5.9 Manual Feed Tray paper sensor
7.5.9.1 Removing the Multifeeder Paper Presence/
Absence Sensor
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Open the front cover.
2) Turn the developer pressure release lever clockwise, and then open the left
door.
3) Draw out the drum unit.
4) Remove the transfer registration unit [1].
- Screw [2], 4 pcs.
[1]
7-14
[2]
F-7-32
[2]
[2]
[2]
F-7-33
5) Remove the feed guide [1].
- Screw [2], 2 pcs.
6) Remove the multifeeder paper presence/absence sensor [1].
- Claw [2], 2 pcs.
- Connector [3], 1 pc.
7.5.10 Manual Feed Pickup Solenoid
7.5.10.1 Removing the Multifeeder Pickup Solenoid
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Open the front cover.
2) Turn the developer pressure release lever clockwise, and then open the left
0017-8579
door.
3) Draw out the drum unit.
4) Remove the transfer registration unit [1].
- Screw [2], 4 pcs.
[1]
[2]
F-7-34
[1]
[3]
[2]
F-7-35
[2]
[1]
[2]
F-7-36
0017-8580