Chapter 2
7) Using a nipper or the like, cut out the face plate [2] (used to install a heater switch) on the lower-right cover [1].
2.6.3 Installing the Heater PCB
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Install the heater PCB unit [2].
- Supplied TP screws (M3x8) [1], 2pcs.
2) Install the heater switch [3] on the right side panel.
2-32
[1]
F-2-75
Install the heater switch with the OFF position on the left
and the ON position on the right just like the main power
switch.
[2]
[3]
F-2-76
[2]
[1]
0017-5556