Canon iR2030 Series Service Manual page 122

Chapter 2
9) Remove the cassette rear cover [1].
- Screws [2], 2 pcs.
9) Install the wire saddle (large) [2], lace the cassette heater harness [3] through the harness guide [4] and wire saddle (large) [2], and then connect the connector
of the cassette heater harness to the connector [5].
10) When attaching the cassette heater to the second or subsequent optional cassette, perform step 11 after attaching the cassette heater.
11) Install the wire saddle (large) [2], lace the cassette heater harness [3] through the harness guide [4] and wire saddle (large) [2], and then connect the connector
of the cassette heater harness to the connector [5].
12) Attach the rear covers of the host machine and cassette.
- Screws, 4 pcs. (Host machine rear cover)
- Screws, 2 pcs. (Cassette rear cover)
13) Turn on the host machine.
14) Turn on the heater switch and check that the cassette heater is powered.
2-50
[2]
[1]
[2]
F-2-106
[1] [2]
F-2-107
[3]
[2] [1]
F-2-108
[5]
[4] [3]
[5]
[4]