Canon iR2030 Series Service Manual page 96

Chapter 2
13) Attach the card reader to the reader.
- Supplied TP screws (M4x16) [1], 2 pcs.
14) Slide the card reader cover [1] to attach it to the card reader mount.
15) Secure the card reader cover [2].
- Supplied binding screw (M4x6) [1], 1pc.
2-24
When tightening the screws, take care not to damage the
repeating harness B.
F-2-58
[1]
F-2-59
Route the repeating wire B [1] as shown below.
[1]
F-2-60
[2]
F-2-61
[1]
[1]