Canon iR2030 Series Service Manual page 100

Chapter 2
2.5.5 Registering the Card IDs
iR2022i / iR2025 / iR2030 / iR2018i
1) Plug the power cord [1] into the outlet, and then turn on the main power switch [2].
2) Press the following keys to display the service mode screen:
> 2 Key > 8 Key >
3) Select "# ACC" using and
4) Select "CARD" using and
5) Specify the first ID number of the card ID numbers to be registered, and then press the OK.
Sequential Card ID numbers of 1000 cards are automatically registered in the department ID, starting with the specified card ID number.
6) Press key to enter the user mode.
7) Select "System Settings."
8) Select "Department ID Management."
9) Select "ON" and then press the OK.
10) Turn main power switch off and on again. Check that "Insert Card" appears.
2-28
After installing the card reader-E1, register the card
numbers to be used in the service mode of the host machine.
If they are not registered, cards will not be recognized when
inserted.
, and then press the OK.
, and then press the OK.
[1]
[2]
F-2-70
0017-5553