6) Attach the heater cover [1].
- Screw [2], 1 pc.
7) Install the reader heater [1].
- Screw [2], 1 pc.
8) Connect the connector [3] of the heater.
9) Attach the heater cover [1].
- Screw [2], 1 pc.
10) Reinstall the parts at the left of the reader.
- Stay (2 screws)
- Jump board (1 scerw)
- Stream reading glass
- Grass holder (2 scerws)
11) Attach the front cover of the reader.
- Screws, 2 pcs.
[1]
F-2-99
[2]
[1]
F-2-100
[1]
F-2-101
Tighten the screws pressing the glass holder towards the glass.
[2]
[3]
[2]
Chapter 2
2-45