Input Selection - Barco R9002321 Owner's Manual

Input selection

a. Press digit button 2 on the RCU or
b. with the local keypad :
(to gain access to the local keypad, see Local keypad in chapter Location
and functions of control.)
- Press ADJUST key, the General access menu is displayed on the screen.
- Use the control disc to
highlight .
- Press ENTER to select
the highlighted source.
Depending on the priority setting in the
'Picture Tuning menu', Video or S-Video
can be displayed.
If the setting is not correct, start up the
adjustment mode by pushing on the
ADJUST key.
Select 'Random Access' and press
ENTER.
Select 'Selected source' and press ENTER.
Highlight 'Picture Tuning' and press
ENTER.
Highlight 'Port 2 : Video' and press ENTER
to toggle between VIDEO and S-VIDEO.
Press EXIT to return.
Press ADJUST to return to operational
mode.
R5975059 BARCOVISION 708 MULTIMEDIA 200498
2
é ê
ç è
ADJUSTMENT MODE
RANDOM ACCESS
é ê
SELECTED SOURCE
RANDOM ACCESS
é ê
ADJUSTMENT MODE
PICTURE TUNING
PICTURE TUNING
é ê
PORT2 : S-VIDEO
é ê
4-5