Barco R9002321 Owner's Manual page 140

MASTER Orbiting)
Highlight
the control disc and press ENTER
to set the ORBITING SPEED to
Fast.
Highlight
control disc and press ENTER to
set the ORBITING SPEED to Slow
Orbiting alignment
Preparation :
Before proceeding to the alignment of the Orbiting default settings, be sure that the
Horizontal Phase and the Raster shift are correctly aligned with the Orbiting mode
set to OFF.
This alignment must be performed in case of a multiple projector installation with
Master and Slave projectors in order to ensure a correct operation of the Orbiting
for all projectors.
Adjustment procedure stand alone projector :
Highlight
with the control disc and press
ENTER.
R5975059 BARCOVISION 708 MULTIMEDIA 200498
with
with the
ENTER continues to Set up Orbiting.
EXIT returns to the Path Selection menu.
ADJUST returns to the Operational mode.
MASTER ORBITING
SPEED: FAST
é ê
é ê
ç è
MASTER ORBITING
ADJUST DEVIATION
é ê
é ê
ç è
B-3