Subscribe to Our Youtube Channel
Related Manuals for Barco R9002410
Summary of Contents for Barco R9002410
- Page 1 BARCO PROJECTION SYSTEMS CINE 5 R9002410 R9002419 OWNER'S MANUAL Date : 18042000 Rev : 01 Art. No. : R5976101...
- Page 2 Produced by BARCO NV, April, 2000 All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at the web : http://www.barco.com Printed in Belgium...
-
Page 3: Table Of Contents
Internal Cross-Hatch Pattern ............................6-2 Selection Menu ................................6-2 Picture Tuning ................................6-2 Color Balance ................................6-3 Gamma ..................................6-3 Decoding ..................................6-3 Color Select ................................. 6-4 Geometry adjustments ..............................6-4 Horizontal Phase adjustment ............................. 6-5 R5976101 BARCO CINE 5 ____________________________________________________________________________________... - Page 4 How to activate the tuner mode ..........................A-1 Tuner Set-up ................................A-2 Broadcasting System ..............................A-2 Auto Search .................................. A-3 Manual Search ................................A-3 Organise Channel List ............................... A-4 Bilingual ..................................A-4 Teletext ..................................A-5 i - 2 ____________________________________________________________________________________ R5976101 BARCO CINE 5...
-
Page 5: Safety Instructions
The part number and serial number are located at the back side of the projector. Record these numbers in the spaces provided below. Refer to them whenever you call upon your BARCO dealer regarding this product. The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product may cause a risk of electrical shock to persons. - Page 6 Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the projector due to lightning and AC power-line surges. 1 - 2 ___________________________________________________________________________________ R5976101 BARCO CINE 5...
- Page 7 If the product exhibits a distinct change in performance, indicating a need for service. Replacement parts - When replacement parts are required, be sure the service technician has used original BARCO replacement parts or authorized replacement parts which have the same characteristics as the BARCO original part. Unauthorized substitutions may result in degraded performance and reliability, fire, electric shock or other hazards.
- Page 8 Safety Instructions 1 - 4 ___________________________________________________________________________________ R5976101 BARCO CINE 5...
- Page 9 12. RF input : Only if the Tuner option is installed. Input for RF signals from a TV cable network or TV antenna. 13. RS 232 : Allows connection to the serial port of a Computer for controlling the projector. Front Panel Terminology IR SENSOR : Receiver for control signals transmitted from the RCU. R5976101 BARCO CINE 5 ___________________________________________________________________________________...
-
Page 10: Locations And Functions Of Control
- variable adjustment speed : when pushing continuously on the arrow keys or the picture keys, the adjustment will be executed in an accelerated fashion. Local Keypad ADJUST EXIT ENTER STANDBY stand-by pause/park sharpness tint color brightness contrast 2 - 2 ___________________________________________________________________________________ R5976101 BARCO CINE 5... - Page 11 RC operating indication : lights up when a button on the remote control is pressed. (This is a visual indicator to check the operation of the remote control). Function keys Direct access keys for certain menu functions. R5976101 BARCO CINE 5 ___________________________________________________________________________________...
- Page 12 Locations and Functions of Control 2 - 4 ___________________________________________________________________________________ R5976101 BARCO CINE 5...
-
Page 13: Connections
Composite video signals from a VCR, OFF air signal, decoder, etc. Composite Video 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 TV Tuner Audio Amplifier V C R R5976101 BARCO CINE 5 ___________________________________________________________________________________... -
Page 14: Connecting A Rgb Analog Source With Composite Sync
Always use an interface when a computer and local monitor have to be connected to the projector. Examples of interfaces which can be applied : Universal analog interface : R9826100 3 - 2 ___________________________________________________________________________________ R5976101 BARCO CINE 5... -
Page 15: Connecting A Component Video Source
The projector automatically determines the presence of a tuner. <EXIT> to return Connect the RF signal to the RF input of the projector. Connect the audio output to an audio amplifier. TV Antenna or Cable Network Audio Amplifier R5976101 BARCO CINE 5 ___________________________________________________________________________________... -
Page 16: Peripheral Equipment
IR receiver and the projector or the RCVDS. The infrared control information from the RCU is sent to the IR Remote Receiver. The IR Remote Receiver 800 displays the selected source on a 7-segment display. Order No. R9827515. 3 - 4 ___________________________________________________________________________________ R5976101 BARCO CINE 5... -
Page 17: Controlling
Battery Compartment Cover The projector can be controlled with a. The RCU b. The hardwired RCU (cable not included) c. The local keypad. Controlling the projector with the RCU and the hardwired RCU is the same. R5976101 BARCO CINE 5 ___________________________________________________________________________________... -
Page 18: How To Use The Rcu
The projector with the corresponding address will respond to that RCU. How to display the projector address. Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. PROJECTOR ADDRESS 001 4 - 2 ___________________________________________________________________________________ R5976101 BARCO CINE 5... -
Page 19: How To Program An Address Into The Rcu
When a valid source number is selected, the projector will display this source or it will wait until the source becomes available. A message Source not available will be displayed for a short time. Warning source not available R5976101 BARCO CINE 5 ___________________________________________________________________________________... -
Page 20: Picture Controls
- Press the ADJUST key to display the GENERAL ACCESS Menu. - Use the arrow keys to highlight the desired control and press ENTER to select. GENERAL ACCESS BRIGHTNESS CONTRAST Enter ADJUST Select with then <ENTER> <EXIT> to return 4 - 4 ___________________________________________________________________________________ R5976101 BARCO CINE 5... -
Page 21: The Pause Key
There is a bar scale associated with each of these keys, in the same way as for the Picture control keys. Mute The Mute key stops the sound when pressed. Pressing a second time restarts the sound. R5976101 BARCO CINE 5 ___________________________________________________________________________________... - Page 22 Controlling 4 - 6 ___________________________________________________________________________________ R5976101 BARCO CINE 5...
-
Page 23: Start Up Of The Adjustment Mode
Some items in the Adjustment mode are password proected. while selecting such an item, the projector asks you to enter your password. (Password protection is only available when the Password strap on the controller module is in the ON position. Contact a BARCO authorized technician when no password is requested during the adjustment procedure and password protection is desired.) Your password contains 4 digits. -
Page 24: Random Access Adjustment Mode
Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE Starting up the Random Access Adjustment Mode. 'RANDOM ACCESS' 'ENTER'. ENTER EXIT Overview of Random Access Adjustment mode. -
Page 25: Selecting Setup Pattern
Random Access Adjustment Mode Selecting a Setup Pattern Genlocked pattern Internal pattern ENTER EXIT ADJUST Internal Cross Hatch Pattern Random Access Adjustment mode selection menu. RANDOM ACCESS ADJUSTMENT MODE Picture Tuning PICTURE TUNING Color Balance PICTURE TUNING COLOR BALANCE 'ENTER'... -
Page 26: Color Balance
Random Access Adjustment Mode Custom Color Balance : ENTER COLOR BALANCE Gamma GAMMA PICTURE TUNING ENTER EXIT Decoding DECODING ENTER PICTURE ENTER EXIT PORT 2 : S-Video PICTURE TUNING ENTER EXIT... -
Page 27: Color Select
Random Access Adjustment Mode Color Select COLOR SELECT ENTER RANDOM Enter Exit Adjust Enter Exit COLOR SELECT GREEN BLUE RED AND GREEN BLUE AND GREEN Enter Exit Geometry Adjustments GEOMETRY ENTER Enter Exit Adjust GEOMETRY... -
Page 28: Horizontal Phase Adjustment
Random Access Adjustment Mode Horizontal Phase Adjustment H PHASE ENTER GEOMETRY Note : No Horizontal Phase adjustment is available on the internal # pattern. Note : If the genlocked pattern was selected, the external source will be displayed. ENTER Raster Shift Adjustment CAUTION : GEOMETRY ENTER... - Page 29 Random Access Adjustment Mode WARNING : In order to ensure maximum CRT longevity and to avoid CRT damage, do not shift the raster outside the phosphor area of the CRT. EXIT...
- Page 30 Random Access Adjustment Mode Left - Right (East-West) Adjustments GEOMETRY LEFT - RIGHT (E/ Left-Right (E-W) ENTER ENTER EXIT ADJUST...
- Page 31 Random Access Adjustment Mode Top-Bottom (North-South) Adjustments Top-Bottom (N/S) ENTER. GEOMETRY TOP-BOTTOM...
-
Page 32: Horizontal Size Adjustment
Random Access Adjustment Mode Horizontal Size Adjustment H Size ENTER GEOMETRY ENTER EXIT ADJUST Note : if the internal # pattern was selected, the pattern remains on the screen. µ if the genlocked pattern was selected, the external source will be displayed. µ... -
Page 33: Vertical Size Adjustment
Random Access Adjustment Mode Vertical Size Adjustment V size ENTER GEOMETRY ENTER EXIT ADJUST Note : if the internal # pattern was selected, the pattern remains on the screen. µ if the genlocked pattern was selected, the external source will be displayed. µ... - Page 34 Random Access Adjustment Mode Top, Bottom, Left Right ENTER EXIT...
-
Page 35: Convergence Adjustment
Random Access Adjustment Mode Convergence Adjustment RANDOM ACCESS ADJUSTMENT MODE PICTURE TUNING GEOMETRY CONVERGENCE COLOR SELECT Select with then <ENTER> <EXIT> to return. CONVERGENCE GREEN ONLY RED ON GREEN BLUE ON GREEN Select with then <ENTER> <EXIT> to return. ENTER CONVERGENCE SEL : select area using... -
Page 36: Service Mode
SERVICE MODE DELETE A BLOCK MEMORY MANAGEMENT DELETE ALL BLOCKS ALL SETTINGS TO MIDPOS R & B CONVERGENCE MID G2 ADJUSTMENT CRT RUN IN CYCLE COMMON SETINGS PROJECTOR WARM UP CRT DRIVE MODE I2C DIAGNOSTICS R5976101 BARCO CINE 5 ___________________________________________________________________________________... -
Page 37: Projector Setup
The status can be changed by pressing the TEXT key once on the RCU. Serial No. : Indicates the manufacturing serial number of the projector. This number can be useful when technical assistance is required. 7 - 2 ___________________________________________________________________________________ R5976101 BARCO CINE 5... - Page 38 CHANGE PASSWORD CHANGE LANGUAGE LANGUAGE CHANGE PROJECTOR ADDRESS CHANGE BAUD RATE POWERUP MODE : Standby ENGLISH COMMON ADDRESS ESPANOL FRANCAIS DEUTSCH Select with then <ENTER> Select with <EXIT> to return then <ENTER> <EXIT> to return R5976101 BARCO CINE 5 ___________________________________________________________________________________...
-
Page 39: Change Projector Address
The current baud rate will be highlighted in the menu. To change the baud rate, use the arrow keys to select the desired baud rate and press ENTER to accept this baud rate. Pressing EXIT in this menu returns to PROJECTOR SETUP menu. 7 - 4 ___________________________________________________________________________________ R5976101 BARCO CINE 5... -
Page 40: Power Up Mode
MEMORY MANAGEMENT Select with COPY A BLOCK then <ENTER> DELETE A BLOCK <EXIT> to return DELETE ALL BLOCKS ALL SETTINGS TO MID POS R & B CONVERGENCE TO MID Select with then <ENTER> <EXIT> to return R5976101 BARCO CINE 5 ___________________________________________________________________________________... -
Page 41: Deletion Of Blocks
A confirmation screen will be displayed. Press ENTER to delete all blocks, or press EXIT to return without deleting anything. Note : Once ENTER is pressed, all block headers and settings are permanently removed and cannot be restored. 7 - 6 ___________________________________________________________________________________ R5976101 BARCO CINE 5... -
Page 42: R & B Convergence To Mid
! <ENTER> to Confirm Again a confirmation screen will be displayed first. <EXIT> to cancel Press ENTER to confirm. Press EXIT to cancel the procedure to set the convergence settings to their midposition. R5976101 BARCO CINE 5 ___________________________________________________________________________________... - Page 43 Service Mode 7 - 8 ___________________________________________________________________________________ R5976101 BARCO CINE 5...
-
Page 44: Options
= ground shield conductor conductor = data information When the cable is ready, plug one side in the remote control and the other side in the connector on the rear of the projector labelled ‘remote’. R5976101 BARCO CINE 5 ___________________________________________________________________________________... -
Page 45: Adapter And Communication Cables
It offers the possibility to connect and switch up to 5 different Video sources, 3 different S-Video sources and 1 RGB Analog source to a BARCO projector. In addition, the audio signal proper to the source, can be switched to an audio amplifier. -
Page 46: Appendix A : Tuner Mode
When a new channel is displayed, a text box appears on the screen with preselection number, the channel name (when entered) and the sound reproduction. When you want to leave the tuner mode, press the BARCO key again. 2. Using the local keypad. -
Page 47: Tuner Setup
Broadcasting System The broadcasting system is the way the signals are transmitted through the air. Barco designed 4 different tuners to fulfil the different broadcasting systems worldwide. Changing the broadcasting system is only necessary for the BG/L system. BG system : European standard. -
Page 48: Auto Search
If another preselection is desired, press the corresponding digits with the numeric keys and press ENTER to store the displayed image in that program location. Press EXIT to return to the 'Tuner Setup' menu. TUNER SETUP MANUAL SEARCH MANUAL SEARCH R5976101 BARCO CINE 5 ___________________________________________________________________________________... -
Page 49: Organise Channel List
Maximum 6 position can be entered in the same way. When the name is programmed, press EXIT to return to the channel list. COMPOSE A - 4 ___________________________________________________________________________________ R5976101 BARCO CINE 5... -
Page 50: Bilingual
The selected sub-page will be displayed on the screen and remains on the screen. This page will frequently updated. HELP To display concealed information. Some teletext pages contain concealed information such as answers to puzzles. To reveal this information press the HELP key. R5976101 BARCO CINE 5 ___________________________________________________________________________________... - Page 51 Tuner Mode A - 6 ___________________________________________________________________________________ R5976101 BARCO CINE 5...
Need help?
Do you have a question about the R9002410 and is the answer not in the manual?
Questions and answers