Adjustment Procedure - Barco R9002321 Owner's Manual

Basic concept

Adjustment procedure :

Start up the adjustment mode by pressing ADJUST (see also chapter 'Start up of
the adjustment mode')
Highlight
Random Access Adjustment mode
(see also chapter Random Access
Adjustment mode). The
will be displayed.
When the
is installed, the projector auto-
matically detects this option and
displays the selection (activation)
line in the Random Access Adjust-
ment Mode main menu.
Highlight
with the control disc and press
ENTER to select.
Note : An external generated white
image will be useful during the ad-
justment.
Note : be sure the horizontal phase
is correctly adjusted. The image
must be centered on the raster
with the horizontal phase adjust-
ment, otherwise it is not possible to
adjust the contrast modulation cor-
rectly.
C-2
XDUCPVUÃ8PIUS6TUÃHP9VG6UDPI
horizontal light output
100%
50%
Image
50%
horizontal light ouptut
100%
green
50%
red
blue
Image
50%
with the control disc and press ENTER to start up the
ENTER selects the Contrast Modulation
menu.
EXIT returns to the Path Selection menu.
ADJUST returns to the Operational mode.
XDUCÃ8PIU S6TUÃHP9VG6UDPI
horizontal light output
100%
8PSI@S
A6 GGÃPAA
50%
Image
vertical
light output
100%
horizontal light ouptut
100%
75%
8PGPS
50%
ÃTCDAU
green
red
blue
Image
vertical
light output
100%
CONTR. MODULATION
ê
R5975059 BARCOVISION 708 MULTIMEDIA 200498
8PS S
A6GGÃPAA
vertical
100%
50%
light output
8PGPS
ÃTCDAU
vertical
50% 100% light output
75%
é