Barco R9002321 Owner's Manual page 102

Blanking adjustments affect only the edges of the projected image and are used
to frame the projected image on to the screen and to hide or black out unwanted
information (or noise). A 0% on the bar scale indicates no blanking.
To start up the Blanking adjustments, follow the next procedure :
Push the control disc up or
down to highlight
on the Geometry menu and then
press ENTER.
The following blanking corrections are possible
:
- Top blanking
- Bottom blanking
- Left blanking
- Right blanking
Therefore :
- If the internal # pattern was
selected, this pattern remains
on the screen.
- If the genlocked pattern was
selected, the external source
will be displayed.
R5975059 BARCOVISION 708 MULTIMEDIA 200498
BLANKING
ê é
GEOMETRY
BLANKING
ê é
ENTER will select blanking
adjustment menu.
EXIT returns to random ac-
cess adjustment mode
menu.
ADJUST returns to opera-
tional mode
8-25