Raster Shift Adjustment - Barco R9002321 Owner's Manual

Raster Shift Adjustment

The green raster must be
centered both horizontally and
vertically on the center of the
GEOMETRY
CRT surface. To center the
RASTER SHIFT
green raster, look into the green
lens and use the control disc to
move the raster.
ê é
ê é
Warning
forbidden area projected raster
crt faceplate border
phosphor border
To start the adjustment, use the arrow keys to highlight Raster shift and press
ENTER to display the coarse shift menu. Select 'Green horizontal' and adjust for
correct raster position in horizontal direction on the phosphor.
Continue with 'Green vertical', then with 'Red vertical' and with 'Blue vertical' until
the rasters of the 3 tubes correctly centered on the phosphor.
8-15
R5975059 BARCOVISION 708 MULTIMEDIA 200498