Barco R9002321 Owner's Manual page 31

RGB3S or RG3sB input selection
a. Press digit button 4 on the RCU or
b. With the local keypad :
(to gain access to the local keypad, see Local keypad in chapter Location
and functions of control.)
- Press ADJUST key, the General access menu is displayed on the screen.
- Use the control disc to high-
light
- Press ENTER to select the
highlighted source.
(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance
(Y) input. The projector detects automatically where the sync signal is located.
4-8
4
é ê
ç è
R5975059 BARCOVISION 708 MULTIMEDIA 200498