Horizontal Size Adjustment - Barco R9002321 Owner's Manual

Push the control disc up or
down to highlight
Geometry menu and then press
ENTER.
Adjust the horizontal size by
pushing the control disc to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
H size too
large
H size too
small
8-22
on the
Ideal image size
GEOMETRY
ENTER will select horizontal size adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST returns to operational mode
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
EXIT will return to Geometry
R5975059 BARCOVISION 708 MULTIMEDIA 200498
H SIZE
ê é