Vertical Size Adjustment - Barco R9002321 Owner's Manual

Push the control disc up or
down to highlight
the Geometry menu and then
press ENTER.
Adjust the vertical size by push-
ing the control disc up or down
until the exact image height is
obtained.
8-24
Image too
tall
Image too
short
on
ENTER will select vertical size adjustment
EXIT returns to random access adjustment
mode menu,.
ADJUST returns to operational mode
Note :
- If the internal # pattern was selected, this
pattern remains on the screen.
- If the genlocked pattern was selected, the
external source will be displayed.
A bar scale and a number indicator give a visual
indication of the vertical size adjustment.
EXIT will return to Geometry.
R5975059 BARCOVISION 708 MULTIMEDIA 200498
GEOMETRY
V SIZE
ê é