Change Projector Address; Change Baudrate - Barco R9002321 Owner's Manual

Change Projector Address

Every projector requires an individual
address between O and 255. This
address can be software installed.
To change that address, push the
control disc up or down to highlight
'Change Projectors Address' and
press ENTER. The Change Projector
Address menu will be displayed and
the actual address will be filled in.
The first digit is highlighted. Select the
individual digits by pushing the con-
trol disc to the right or to the left.
Reprogram with the digit keys on the
RCU.
Press ENTER to confirm.
Press EXIT to return to the projector
set up menu.

Change baudrate

The communication speed between
projector and computer has 8 pos-
sible speeds. The baud rate speed
can be software set up.
Highlight 'Change Baudrate' by push-
ing the control disc up or down and
press ENTER to display the Baud
rate menu.
9-8
PROJECTOR SETUP
CHANGE PROJECTOR ADDRESS
ENTER displays the 'Change Projector
Address' menu.
EXIT returns to the Service mode main
menu.
PROJECTOR ADDRESS
ç è
PROJECTOR SETUP
CHANGE BAUDRATE
R5975059 BARCOVISION 708 MULTIMEDIA 200498
ê é
ê é