Barco R9002321 Owner's Manual page 50

All picture geometry and convergence adjustments are made while in the
'Adjustment mode'. Two possible ways to enter the adjustment mode :
a) Using the RCU.
Press the ADJUST key.
The projector displays the path selection menu.
b) Using the local keypad.
Press the ADJUST key.
The projector displays the
Use the control disc to highlight
TER. The path selection menu
will be displayed.
R5975059 BARCOVISION 708 MULTIMEDIA 200498
.
and press EN-
$'-867
67$1'%<
Enter ADJUST
é ê
ç è
(;,7
(17(5
6-3