Undo All Settings To Midpos; R & B Convergence Mid - Barco R9002321 Owner's Manual

ENTER will set all settings to their
midposition. EXIT will cancel the op-
eration to set all settings to their
midposition.

Undo all settings to midpos

When "All settings to midpos" is se-
lected, all settings are set to their
midposition. To cancel this action,
select 'Undo all settings to midpos' by
pushing the control disc up or down
and press ENTER. 'Undo all settings
to Midposition' is displayed in the
Memory management menu in stead
off 'All settings to midposition' when
this latter is pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments as
geometry or convergence are al-
ready readjusted.
presssed all settings are reset to the
previous settings.
R & B convergence mid
Item is password protected.
Highlight
with the control disc and press
ENTER to set all convergence set-
tings to their midposition. A confir-
mation screen will be displayed first.
R5975059 BARCOVISION 708 MULTIMEDIA 200498
When undo is
!
MEMORY MANAGEMENT
UNDO ALL SETTINGS TO MIDPOS
ê é
MEMORY MANAGEMENT
R & B CONVERGENCE MID
ê é
9-15