Barco R9002321 Owner's Manual page 142

Adjustment procedure multiple projector installations :
Important : to allow corrections in the deviation alignments of the slave projectors,
never adjust the deviations of the master projector to its maximum.
Default setting of the Master projector see 'Stand alone projector'.
Highlight
with the control disc and press
ENTER.
When adjusting the horizontal and
the vertical deviation, the picture
moves in the corresponding direc-
tion, allowing the set up of the
deviation without orbiting opera-
tion.
Push the control disc to the left
(right) or up (down) to toggle be-
tween Hor. and Vert. deviation
adjustment.
Adjust horizontal deviation by pushing
the control disc to the left or to the right.
Adjust vertical deviation by pushing
the control disc forward or backward.
R5975059 BARCOVISION 708 MULTIMEDIA 200498
SLAVE ORBITING
ADJUST DEVIATION
ENTER will select the Orbiting Adjustment
menu.
EXIT returns to the Path Selection menu.
é ê
é ê
ç è
B-5