Barco R9002321 Owner's Manual page 151

blocks available, the projector dis-
plays a warning.
WARNING
Press ENTER to continue and start
up the adjustment mode to delete a
block.
It will be necessary to delete an
existing block to create adjustment
ATTENTION
space for the new source.
When ENTER is pressed, the warning disappears. Press ADJUST to start up the
and select with the arrow keys.
Follow the procedure as described in .
Reselect the new source with the numeric keys on the RCU or the local keypad
even when the new source is already displayed on the screen.
By reselecting this new source, you force the projector to write the source header
in the free space created by the previous deletion action. The new source can
now be adjusted, the settings will be stored for future use.
When the warning is displayed by pressing ENTER, you will see the normal image.
Do not forget to start the 'deletion of a block' procedure, otherwise the image
settings of the last selected source will be overwritten with the new adjustments.
B. projector equipped with RCVDS or VS05.
When a new source is connected :
a) the projector looks for the most corresponding adjustment block. If such a block
is present, the settings will be used to display the connected source.
b) the projector does not find a matching block. The warning is displayed. Follow
the procedure as in A.
D-2 R5975059 BARCOVISION 708 MULTIMEDIA 200498