Line Doubler; Port2.S-Video/Video - Barco R9002321 Owner's Manual

Line Doubler

Line doubling is only possible for Video, S-Video or Component Video images on
standard line frequency.
To eliminate the video line patterns and to improve the image stability, the line
doubler has to be switched on. The line doubler is default set in the ON position
when starting up for the first time. The setting of the line doubler will be saved
together with the source number. Each time this source number is selected, the
last saved version will be loaded.
Highlight
control disc and press ENTER
to toggle between
and
Port 2 : S-Video/Video
Port 2 can be used as Video or
S-Video input.
Highlight
control disc up or down and
press ENTER to toggle between
and
R5975059 BARCOVISION 708 MULTIMEDIA 200498
with the
.
ENTER will toggle Line Doubler between ON
and OFF
EXIT will return to the Random Access Ad-
justment menu.
by pushing the
.
ENTER will toggle between S-Video and
Video
EXIT will return to the Random access main
menu.
ADJUST returns to operational mode
PICTURE TUNING
LINE DOUBLER : ON
ê é
PICTURE TUNING
PORT 2 : S-VIDEO
ê é
8-9