Function Test - Toshiba DP1600 Service Handbook

1.2.4 Function test

The function test checks each function of the copier. To enter the function test mode, follow the procedure
below, or enter the Service mode (*,#,*,*) and select the menu for the function test
<Key used in operation>
1 3
Power ON
or Select test menu
SET
The following tests can be conducted in the Function test mode.
01. OPE. PANEL TEST
02. PRINT TEST
03. MODEM TEST *1 (Factory test)
04. SENSOR TEST
05. SRAM TEST
06. DRAM TEST
07. CLOCK IC TEST
08. SCANNER TEST
09. CODEC TEST
10. OUTPUT TEST
11. PRINTER BOARD TEST *2
*1: When the FAX kit (GD-1060) is not installed, the test is not present.
*2: When the PCL kit (GA-1030) is not installed, the test is not present.
December 2000 © TOSHIBA TEC
<Display messages>
FUNCTION TEST
01.OPE.PANEL TEST
02.PRINT TEST
03.MODEM TEST
1 - 21 1600/2000/2500 ADJUSTMENT ITEMS