1.8.3 Adjusting the carriage 1
(a) Installing carriage 1
When installing carriage 1, make adjustments in
the following manner:
1. Pass the lamp cable over the roller of carriage
2 and place carriage 1 on scanner.
2. Reliably hold the carriage 2 holding part to the
left side frame.
3. Securely hold the carriage 1 holding part to the
left side frame.
4. Tighten 2 screws to secure carriage 1 to wire.
December 2000 © TOSHIBA TEC
Roller
Lamp cable
Carriage 2
Fig. 1-8-9
Holding part
Carriage 1
Screw
Carriage 1
Fig. 1-8-10
1 - 77
1600/2000/2500 ADJUSTMENT ITEMS
Holding part
Lamp cable
057-1
Carriage 1
Carriage 1
Screw
057-2