1.8 Adjusting the Scanner Section
1.8.1 Installing glass
(a) Installing ADF glass
To install new ADF glass, wipe off the mounting sur-
face and mount the glass by placing it at the posi-
tion shown right.
(b) Installing original glass
Original glass should be installed in the following
manner:
1. Place the ADF glass by aligning with the posi-
tioning tab.
2. Hold original glass to the stopper and tighten 4
screws.
3. Hold original glass stay to original glass and
tighten 2 screws.
1600/2000/2500 ADJUSTMENT ITEMS
ADF glass
Tab
Original
glass
Screw
1 - 74
Fig. 1-8-1
Stopper
Fig. 1-8-2
Original glass stay
Original glass
Screw
Fig. 1-8-3
December 2000 © TOSHIBA TEC
043-3
043-4
043-5