Toshiba DP1600 Service Handbook page 214

The MS-DOS prompt screen shows the following:
(1) Type "mkrpcdsk" and press the [Enter] key.
The batch file is executed and the download disk creation program is started.
(2) Insert a blank floppy disk (Disk 1) in the drive and press the [Enter] key.
(3) Press the [Enter] key.
Formatting of Disk 1 begins.
December 2000 © TOSHIBA TEC 5 - 9 1600/2000/2500 UPDATING THE FIRMWARE
05-03-001
05-03-002
05-03-003
05-03-004
05-03-005