Troubleshooting - Toshiba DP1600 Service Handbook

4. TROUBLESHOOTING

Before starting any repair work, strictly obey the following instructions.
CAUTION:
• When replacing parts, be sure to turn the main switch OFF and unplug the power-cord plug
from the outlet.
Notes:
• Be sure to output a dial list and a system function list and keep them until the troubleshooting
is completed so that if the user's set data is lost it can be re-entered.
• Before turning the main switch OFF, be sure to confirm that the residual memory is 100%
and no memory reception documents exist. If there is such a document , it will be lost if the
service activity requires the battery backup to be unplugged.
• Cover the process unit with a cloth, etc., whenever it is removed from the machine to protect
the photosensitive material from deterioration by exposure to light.
• Be sure to perform each adjustment and setting when replacing the following part.
Main PWA
CCD unit
Scanner control PWA
Carriage 1
Carriage 2
Laser scanner unit
Original length sensor (RADF)
Read sensor (RADF)
Reverse sensor (RADF)
December 2000 © TOSHIBA TEC
: Refer to 1.10 MAIN PWA replacement procedure.
: Refer to 1.4.3 Printer unit adjustment and 1.8.5 CCD
unit.
: Refer to 1.4.3 Scanner unit adjustment.
: Refer to 1.8.3 Adjusting the Carriage 1.
: Refer to 1.8.4 Adjusting the Carriage 2.
: Refer to 1.4.2 Printer unit adjustment and 1.4.4 Printer.
: Automatic sensor adjustment (05-356)
: Automatic sensor adjustment (05-356)
: Automatic sensor adjustment (05-356)
4 - 1
01/05
1600/2000/2500 TROUBLESHOOTING