Paper Transporting Jam At The Radf - Toshiba DP1600 Service Handbook

4.1.6 Paper transporting jam at the RADF

E71 Original feeding jam at the feeding area of RADF
When original is left inside the RADF, remove it. If this error occurs frequently, the following
items should be checked.
[Two or more originals are fed simultaneously.]
Have too many originals been placed?
YES
Reset the originals, following the specification.
NO
Are the original sheets curled or folded too much?
YES
Flatten and reset the originals.
NO
Are different-size originals placed together?
YES
Set only one-size originals.
NO
Is the separation roller stained?
YES
Clean the separation roller.
[The original does not reach the feed roller.]
Does the paper thickness satisfy the specifications?
NO
Reset the originals, following the specification.
YES
Is the pickup roller, feed roller or separation roller stained?
YES
Clean the roller.
NO
Is the transporting force of the pickup roller, feed roller or separation roller insufficient?
YES
Replace the rollers.
1600/2000/2500 TROUBLESHOOTING 4 - 24 December 2000 © TOSHIBA TEC