Maintenance Performed Every 81,000 (Dp1600/2000 Series) And 99,000 Copies (Dp2500 Series); Preventive Maintenance Check List - Toshiba DP1600 Service Handbook

2. PREVENTIVE MAINTENANCE (PM)
2.1 Maintenance Performed Every 81,000 (DP1600/2000 Series) and
99,000 Copies (DP2500 Series)
(1) Preparation
Ask user about the current machine condition and note them down.
Before starting maintenance, make some sample copies and save them.
Turn OFF the power, and be sure to unplug the copier.
(2) Perform preventive maintenance using the following checklist and the illustrations. Refer to the Ser-
vice Manual and Parts List if necessary.
(3) When the maintenance is finished, plug in the copier, turn ON the power, and make a few copies to
confirm that the copier is working properly.

2.2 Preventive Maintenance Check List

Cleaning
A Cleaning with GR
alcohol
Cleaning with W
soft pad, cloth or
vacuum cleaner FL
SI
AV
Notes: 1. Perform cleaning and apply lubrication every 81,000 copies for DP1600/2000 series and 99,000
copies for DP2500 series.
2. <P-I> under "Remarks" indicates page and item number in the Parts List.
3. Replacement cycle of the parts of the feeding section depends on the number of papers fed
from each paper source.
4. Values under "Replacement" indicates the replacement cycle for the DP1600/2000 series
DP2500 series.
5. Do not put oil on the rollers and belts when lubricating them.
6. With the SRU machines, replace the parts with the life of 27,000 copies (DP1600/2000 series)
and 33,000 copies (DP2500 series) listed in the check list.
7. Replace the heat roller (metallic gold or dark green) and PM kit (FU-KIT-1600N and FU-KIT-2500N)
at every 135,000 copies (DP1600/2000 series) and 165,000 copies (DP2500 series).
December 2000 © TOSHIBA TEC
Symbols used in the check list
Lubrication
GR Grease 27K Every 27,000 copies
(X5-6020) 33K Every 33,000 copies
White grease 81K Every 81,000 copies
(Molykote HP-300) 99K Every 99,000 copies
FL Floil (GE-334C) 135K Every 135,000 copies
Silicon oil 165K Every 165,000 copies
Alvania No. 2 Replace if deformed
or damaged
2 - 1
02/03
Replacing Operation check
After cleaning or
replacing, check
for no abnormality
1600/2000/2500 PREVENTIVE MAINTENANCE
Date
User's name
Serial No.
Inspector's
name
Remarks